BHRKG - PYROTECHNIC COMPOSITIONS (SEE SUPP DATA)
- MSDS: BHRKG
- Manufacturer: PACIFIC SCIENTIFIC CO HTL ENERGY SYSTEMS DIV
- Product Name: PYROTECHNIC COMPOSITIONS (SEE SUPP DATA)
- National Stock Number: 4210-01-206-9528
Product Identification
Product ID:PYROTECHNIC COMPOSITIONS (SEE SUPP DATA)
MSDS Date:02/01/1987
FSC:4210
NIIN:01-206-9528
MSDS Number: BHRKG
Responsible Party
CHANDLER, AZ 85226
US
Emergency Phone: 602-961-1100
Info Phone: 602-961-1100
Cage: 54181
Contractor
Telephone: 602-796-1100
Cage: 54181
Ingredients
POTASSIUM PERCHLORATE
CAS: 7778-74-7
RTECS: SC9700000
Fraction By Weight: 52%
ZIRCONIUM
CAS: 7440-67-7
RTECS: ZH7070000
Fraction By Weight: 42%
OSHA PEL 5 MG/M3/10 STEL
ACGIH TLV: 5 MG/M3/10 STEL;9192
GRAPHITE, NATURAL
CAS: 7782-42-5
RTECS: MD9659600
Fraction By Weight: 3%
OSHA PEL 15 MPPCF RDUST
ACGIH TLV: 2 MG/M3 RDUST; 9293
VITON B
Fraction By Weight: 3%
Hazards
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:HEALTH HAZARDS WERE NOT TRANSMITTED BY
THE MANUFACTURER. DOD-DGSC-SSH HAS ENTERED THEM. PRODUCT IS
OXIDIZER AND FUEL CONTAINED IN A RUBBER MATRIX. IT SHOULD POSE NO
CHEMICAL HAZARD. PRIME HAZARD WILL BE EXPLOSION OF CARTRIDGE AND
PHYSICAL INJURY.
Explanation of Carcinogenicity:THE PRODUCT CONTAINS NO INGREDIENT THAT
IS LISTED BY IARC, NTP OR OSHA AS A CARCINOGEN.
Effects of Overexposure:NO SIGNS OR SYMPTOMS GIVEN BY MFR.
Medical Cond Aggravated by Exposure:NONE GIVEN BY MANUMACTURER.
First Aid
First Aid:EYE:FLUSH W/WATER 15 MIN, HOLD LIDS OPEN. SKIN:WASH WITH SOAP
& WATER. INHALED:REMOVE TO FRESH AIR. INGESTED:DO NOT INDUCE
VOMITING. GIVE 2 LARGE GLASSES OF MILK OR WATER AND GET IMMEDIATE
MEDICAL CAR E. GIVE NOTHING BY MOUTH IF UNCONSCIOUS. FIRST AID
APPEARS APPROPRIATE FOR MANUFACTURER'S EMPLOYEES. DGSC-SSH EXPECTS
ONLY PHYSICAL INJURIES AND THAT APPROPRIATE FIRST AID FOR THE
TRAUMA BE GIVEN.
Fire Fighting
Autoignition Temp:Autoignition Temp Text:>500F
Extinguishing Media:FLOOD WITH WATER. DO NOT ATTEMPT TO SMOTHER.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE. USE WATER
SPRAY TO COOL NEARBY CONTAINERS EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:FIRE OR EXCESSIVE HEAT MAY CAUSE
EXPLOSION.
Accidental Release
Spill Release Procedures:RECOVER AND CLEAN UP USING TECHNIQUES
APPROPRIATE FOR STATIC SENSITIVE MATERIAL, SUCH AS ANTI-STATIC
BROOMS,NON- SPARKING TOOLS AND CONTAINERS, AND DUST FORMATION. DO
NOT BLOW WITH COMPRESSED AIR.
Neutralizing Agent:NONE
Handling
Handling and Storage Precautions:USE STATIC SUPPRESSION PROCEDURES.
STORE IN AN APPROVED, COOL, DRY AREA. DO NOT DROP OR STRIKE.
PROTECT FROM ELECTRICAL SPARKS AND STATIC DISCHARGE
Other Precautions:NONE
Exposure Controls
Respiratory Protection:RESPIRATOR WILL NOT NORMALLY BE NECESSARY. USE
NIOSH/MSHA APPROVED RESPIRATOR FOR DUST IF EXPOSURE IS ABOVE THE
TLV/PEL.
Ventilation:NORMAL ROOM VENTILATION IS SUFFICIENT. HANDLE IN 20% - 65%
HUMIDITY CONDITIONS.
Protective Gloves:NOT REQUIRED.
Eye Protection:SAFETY GLASSES
Other Protective Equipment:COTTON CLOTHING, CONDUCTIVE SHOES, WRIST OR
LEG STATS.
Work Hygienic Practices:USE GOOD EXPLOSIVE HANDLING PROCEDURES.
Supplemental Safety and Health
THIS IS INGREDIENT A OF A TWO PART CARTRIDGE. THIS MSDS COVERS THE
HANDLING OF THE CHEMICAL MIX, NOT FOR THE CARTRIDGE. SEE P/N IND A
FOR HANDLING OF THE CARTRIDGE.
Chemical Properties
HCC:E2
Solubility in Water:SLIGHT
Appearance and Odor:DARK GREY/BLACK POWDER, NO ODOR
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER
Stability Condition to Avoid:HIGH TEMPERATURES, SPARKS, OPEN FLAMES,
OTHER IGNITION SOURCES.
Hazardous Decomposition Products:MAY INCLUDE CHLORINE OR CHLORINE
OXIDE.
Disposal
Waste Disposal Methods:DISPOSE I/A/W ALL FEDERAL, STATE AND LOCAL
REGULATIONS. MANUFACTURER SUGGESTS THAT DISPOSAL MAY BE DONE BY
INCINERATING CARTRIDGE CONTENTS IN SMALL QUANTITIES. SEE P/N IND A
FOR DISPOSAL OF CARTRIDGES .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.